System information

Wireless Interface Configuration
Setting the Radio Working Mode
To display the current radio mode setting from the Exec level, use the show
interface wireless g command, as shown in the following example.
HP420#show interface wireless g
Wireless Interface Common Information
============================================================
----------------Identification------------------------------
Description : Guest Access
Radio mode : 802.11g only
Channel : 1 (AUTO)
Supported SSID number : 8
Supported Total Client number : 128
Status : Disabled
----------------802.11 Parameters---------------------------
Transmit Power : 20% (6 dBm)
Max Station Data Rate : 54Mbps
Multicast Data Rate : 5.5Mbps
Fragmentation Threshold : 2346 bytes
RTS Threshold : 2347 bytes
Beacon Interval : 100 TUs
Authentication Timeout Interval : 60 Mins
Association Timeout Interval : 30 Mins
DTIM Interval : 1 beacon
Preamble Length : AUTO
Slot time : AUTO
----------------Security------------------------------------
Static Keys :
Key 1: OPEN Key 2: OPEN Key 3: OPEN Key 4: OPEN
----------------Antenna-------------------------------------
Antenna mode : Diversity
Antenna gain attenuation
Low channel : 100%
Mid channel : 100%
High channel : 100%
============================================================
HP420#
6-9