System information

Wireless Interface Configuration
Setting the Radio Working Mode
Web: Setting the Radio Working Mode
The Port/Radio Settings window on the Configuration tab provides the setting
for the access point’s radio working mode.
No t e If you are using the worldwide product, J8131A, before you can configure the
radio settings the Country Setting must be set using the CLI. See “Setting the
Country Code” on page 6-3.
The web interface enables you to modify these parameters:
■ Working Mode: Selects a standard operating mode for the access point.
• b & g mixed mode: Both 802.11b and 802.11g clients can communi-
cate with the access point. This is the default configuration.
• g only mode: Only 802.11g clients can communicate with the access
point.
• b only mode: Both 802.11b and 802.11g clients can communicate with
the access point, but 802.11g clients can only transfer data at 802.11b
standard rates (up to 11 Mbps).
To Change the Working Mode:
1. Select the Configuration tab.
2. Click the [
Port/Radio Settings] button.
3. Select the working mode you want to use, b & g mixed mode, g only mode,
or b only mode.
4. Click the
[Radio Mode Change] button.
6-7