System information

General System Configuration
Setting up Filter Control
• Enable: Access point filters Ethernet protocol types based on the
configuration of protocol types in the filter table. If a protocol has its
status set to “ON,” the protocol is not forwarded by the access point.
To Set Local and Management Filters:
1. Select the Configuration tab.
2. Click the [
Filter Control] button.
3. To enable IAPP support, set IAPP to enable.
4. To prevent wireless-to-wireless client communication, set Local Bridge
Filter to enable.
5. To prevent access point management from wireless clients, set AP
Management Filter to enable.
6. To implement specific Ethernet protocol filters, set Ethernet Type Filter to
enable.
a. From the list of protocol types, select ON for those protocols that you
want to filter from the access point.
7. Click the
[Apply Changes] button.
5-59