System information

General System Configuration
Configuring RADIUS Accounting
To display the current RADIUS server settings from the Exec level, use the
show radius command, as shown in the following example.
HP420#show radius
11g Radius Authentication Server Information
============================================================================
ssid IP Port Retransmit Timeout Mac-format Vlan-format
============================================================================
1 (P)0.0.0.0 1812 3 5 NO_DELIMITER HEX
1 (S)0.0.0.0 1812 3 5 NO_DELIMITER HEX
2 (P)0.0.0.0 1812 3 5 NO_DELIMITER HEX
2 (S)0.0.0.0 1812 3 5 NO_DELIMITER HEX
3 (P)0.0.0.0 1812 3 5 NO_DELIMITER HEX
3 (S)0.0.0.0 1812 3 5 NO_DELIMITER HEX
4 (P)0.0.0.0 1812 3 5 NO_DELIMITER HEX
4 (S)0.0.0.0 1812 3 5 NO_DELIMITER HEX
5 (P)0.0.0.0 1812 3 5 NO_DELIMITER HEX
5 (S)0.0.0.0 1812 3 5 NO_DELIMITER HEX
6 (P)0.0.0.0 1812 3 5 NO_DELIMITER HEX
6 (S)0.0.0.0 1812 3 5 NO_DELIMITER HEX
7 (P)0.0.0.0 1812 3 5 NO_DELIMITER HEX
7 (S)0.0.0.0 1812 3 5 NO_DELIMITER HEX
8 (P)0.0.0.0 1812 3 5 NO_DELIMITER HEX
8 (S)0.0.0.0 1812 3 5 NO_DELIMITER HEX
============================================================================
11g Radius Accounting Server Information
============================================================================
index IP AcctPort Retransmit Timeout InterimUpdate
============================================================================
1 (P) 192.168.1.25 1813 5 10 7200
2 (S) 192.168.1.13 1813 3 5 3600
============================================================================
HP420#
5-57