Product guide

IP Routing Features
Overview of IP Routing
Parameter Description Default See page
ICMP Router
Discovery
Protocol
(IRDP)
An IP protocol that a router can use to advertise the
IP addresses of its router interfaces to directly
attached hosts. You can enable or disable the
protocol at the Global CLI Config level.
You also can enable or disable IRDP and configure
the following protocol parameters on an individual
VLAN interface basis at the VLAN Interface CLI
Config level.
• Forwarding method (broadcast or multicast)
• Hold time
• Maximum advertisement interval
• Minimum advertisement interval
• Router preference level
Disabled 3-21
3-22
Static route An IP route you place in the IP route table. No entries 3-16
Default
network
route
The router uses the default network route if the IP
route table does not contain a route to the
destination. Enter an explicit default route (0.0.0.0
0.0.0.0 or 0.0.0.0/0) as a static route in the IP route
table.
None configured 3-20
3-8