Specifications

Routing
Rev. 9.41 Module 3 – 85
8212zl switch uplink port connected to the 5406zl switch
The tagging on directly connected switch ports must match. Because these switches
are carrying traffic for multiple VLANs, both ports must be tagged members of VLAN
20.
8212zl switch uplink port connected to the 6600 switch
To route the traffic, the 8212zl switch removes the original Ethernet header and adds
a new one, using the database server's MAC address for the destination. To forward
the Ethernet frame, the uplink port, must be tagged for the database server's VLAN.
(The port is handling traffic from multiple VLANs.)
6600 switch
The uplink port must have the same VLAN settings as the directly connected uplink
port on the 8212zl switch.
Database server's switch port
The database server supports 802.1Q and is configured to accept tagged traffic in
this VLAN.
For HP Internal Use Only