Specifications

Getting Started with HP ProCurve Switching and Routing
Module 3 – 80 Rev. 9.41
Routing example – page 3
The workstation sends the Ethernet frame to its directly connected switch, which is
operating as a Layer 2 switch. (IP routing is not enabled). The Ethernet frame has the
destination MAC address 00-1D-B3-F1-EF-40. The encapsulated IP packet has the
destination IP address 10.1.30.101.
The 5406zl switch checks its forwarding table for the Ethernet destination address-00-
1D-B3-F1-EF-40.
B17 is the uplink port that connects to the 8212zl switch and forwards traffic from
both VLAN 10 and VLAN 20. As you can see in the switch's forwarding table, B17
is listed for both 10.1.10.1 and 10.1.20.1-the IP addresses assigned to the 8212zl
switch for VLAN 10 and VLAN 20, respectively.
For information about Layer 2 forwarding, see Module 2: VLANs.
For HP Internal Use Only