Specifications

Link Aggregation
Rev. 9.41 Module 4 – 121
Module 4 — Summary
Summary
In this module, you learned how to increase bandwidth between switches by using
HP ProCurve Port Trunking or LACP to create a trunk. Further, you were introduced to
two types of trunks, static and dynamic, and discovered that static trunks have a
distinct advantage over dynamic trunks. Namely, you can configure static trunks with
the same settings you use to configure ports - settings that are not available with
dynamic trunks.
Finally, you learned that with trunking, the more conversations you have the better
because the switch can distribute the conversations more evenly.
For HP Internal Use Only