Specifications

Link Aggregation
Rev. 9.41 Module 4 – 97
Requirements for port trunking
Link aggregation requirements are:
 Links in a trunk must begin on the same switch.
 Links in a trunk must end on the same switch.
 With an LACP trunk, links must be configured with the same speed, duplex, and
flow control.
Managed HP ProCurve switches currently support a maximum of four or eight ports
in a trunk, and up to 144 trunks, depending on the switch.
The table lists a number of HP ProCurve managed switches and their maximum
number of supported trunks and ports in a trunk. The actual number of trunks
supported on a particular switch depends on the number of physical ports available.
For HP Internal Use Only