Installation guide

32
Enhancements
Release Y.11.16 Enhancements
Example. To configure RADIUS accounting on the switch with start-stop for Exec functions, stop-
only for system functions, and interim-update for commands functions. This example continues from
figure 4, where the session ID was configured as common.
Figure 5. Example of Configuring Accounting Types and Controls
ProCurve(config)# aaa accounting exec start-stop radius
ProCurve(config)# aaa accounting system stop-only radius
ProCurve(config)# aaa accounting commands interim-update radius
ProCurve(config)# show accounting
Status and Counters - Accounting Information
Interval(min) : 0
Suppress Empty User : No
Sessions Identification : Common
Type | Method Mode
-------- + ------ --------------
Network | None
Exec | Radius Start-Stop
System | Radius Stop-Only
Commands | Radius Interim-Update
Common is configured to apply the same
Acct-Session-ID to all accounting records
for a given switch management session.
Exec, System, and Commands accounting
are active. (Assumes the switch is
configured to access a reachable RADIUS
server.)