Installation guide

18
Enhancements
Release Y.11.12 Enhancements
Customized Banner without Password Configured. When a custom MOTD banner is configured
and there is no password required, the custom MOTD banner displays followed by the “press any key
to continue” prompt. When any key is pressed, the custom banner is cleared and the CLI prompt
displays.
Customized Banner with Password Configuration. When a custom MOTD banner is configured
on the switch and a password is required, the custom banner displays, followed by the password
prompt. Entering the correct password clears the banner and displays the CLI prompt.
■ Enhancement (PR_0000001641) — Set Console Inactivity Time Out without Reboot
Console/Telnet Inactivity Timer
This enhancement allows you to configure the inactivity timer and have the new value take effect
immediately, without a reboot of the system.
For example:
ProCurve(config)# console inactivity-timer 20
Release Y.11.12 Enhancements
No new enhancements.
Release Y.11.13 Enhancements
No new enhancements. Not a public release.
Release Y.11.14 Enhancements
No new enhancements. Never released.
Syntax: console inactivity-timer <minutes>
If the console port has no activity for the number of minutes configured, the switch
terminates the session. A value of zero indicates the inactivity timer is disabled.
Default: 0 (zero)