Use and Care Guide

If Your Kettle Boils Dry

The Kettle element is protected by an automatic safety

device. If the Kettle is accidentally switched on without

water, or is allowed to boil dry, the Kettle will automatically

repeat a cycle of switching off, cooling down, and switching

back on. If this happens, you should:

1� Unplug the Kettle.

2� Wait about 20 minutes for the element to cool down and

then use as normal and check that the Kettle functions

correctly.

Cleaning and Descaling Your Kettle

w WARNING

Electric Shock Hazard� Never immerse the

Kettle in water or other liquids.

1� With Kettle unplugged, empty any remaining water and

rinse. Allow Kettle to cool.

2� To avoid scale/lime deposit buildup, empty Kettle after

each use.

3� If you have scale/lime deposit buildup, add 1/2 teaspoon

cream of tarter to your Kettle and fill to MAX fill line with

water. Switch Kettle on and allow to boil. Switch Kettle off.

Let sit for 15 minutes. Empty Kettle and rinse with fresh

water.

4� Wipe the exterior of Kettle with a damp cloth. Do not use

abrasive scouring pads or powders as they may scratch

the smooth surface of the Kettle.