Manual

ASSEMBLY STEPS
STEP 11: Side Burner
6. insert valve stem through hole in fascia and attach with previously removed 2 screws in
previous step as shown in Fig. 11g.
7. Replace side burner through the side burner hole as shown in Fig. 11 h, and place the side
burner tube over the valve, making sure that valve is inside side burner tube as shown in
Fig. 11i.
Fig. 1lg Fig. 1lh Fig. 1li
8. Reattach side burner to side burner shelf with the 2 previously removed screws as shown in
Fig. 1l j,
9. Push control knob onto side burner valve stem as shown in Fig. 11k.
Fig. 1l j Fig. 11k Fig. 111
10. Insert the small tip of the side burner wire into the socket of side burner valve as shown in
Fig. 111and Fig. 11m, Secure by pressing on with white cap as shown in Fig. 11n. Also
please note Fig. 111, Fig. 11m, and Fig. 1 ln; these three views are of the underside of the
right side shelf, looking towards the front of the grill from the rear.
11. Place side burner grate on side burner as shown in Fig. 11o.
Fig. 11m Fig. 11n Fig. 11o
23