User's Manual

A
. Click on the Change/Apply button to modify the settings in the General
Connection Setting field.
B
. Select the channel in ad-hoc mode from the Channel drop-down menu.
C
. Select the transmission speed from the Tx Rate drop-down menu.
D
. Untick the Any box to select another SSID network.
E
. Select Infrastructure or Ad-hoc mode from the Network Type drop-down
menu.
F
. Select Enable WEP or Disable WEP from the Encryption drop-down menu.
G
. Select Open System, Shared Key, or Auto from the Authenticication Mode
drop-down menu.
H
. Click on the WEP Encryption Key Setting button to modify the WEP key
settings. A new screen will appear (see hereafter).
I
. Select a previously saved profile from the Profile Name drop-down menu,
and click on the Load button to load the profile into memory. Alternatively, key
in the profile name and click on the Save Current or Delete button to
respectively save or remove the profile.
J. For advanced settings or information about the software, click on the
Advanced Settings or the Information button.