User's Manual

6
6. Click the “Continue Anyway” to complete the installation of “Procomp WLAN Driver
and Utility”.
Driver Installation
This section describes the installation for the Windows driver on the Windows XP, Windows
2000, Windows ME, and Windows 98SE OSs.
To install the driver:
1. Insert the Procomp Wireless Network Adapter into a 32-bit CardBus slot.
2. Wait for the “Found New Hardware Wizard” dialog box to appear as Figure 3. Choose
the recommended method to “Install the software automatically,” and click “Next” to
continue.
Figure 3. Windows Found New Hardware Dialogue
3. The Procomp NDIS evaluation driver currently does not have a digital signature from
Microsoft. Therefore, Windows may show a warning message shown as Figure 4. Click
“Continue Anyway” to proceed with driver installation.
4. If the “Found New Hardware Wizard” dialog box doesn’t appear, run the “Add/Remove
Hardware” in the “Control Panel”. Click the option to install the driver manually by
browsing the created directory and selecting the “IPN2220.inf”.