User's Manual
Table Of Contents
- User’s Guide
- Wireless LAN AP-Router
- Model:
- PW8540IM
- IEEE 802.11b/g
- System Requirement
- Installation Instructions
- Configuring Windows for IP Networking
- Collecting ISP Information
- Setup
- Global Address
- Wireless
- Tools
- Status
- DHCP
- Log
- Statistics
- Printer
- Virtual Servers
- Filters
- IP/URL Block
- Special Apps
- DMZ Host
- MAC Clone
- Dynamic DNS
- Proxy DNS
- SNMP
- Static Routing
- FEDERAL COMMUNICATIONS COMMISSION (FCC) REQUIREMENTS, PART 15
- REGULATORY INFORMATION / DISCLAIMERS
PREPARING YOUR NETWORK
FIGURE 2-3: Internet Protocol (TCP/IP) Properties dialog box
5. Click Obtain an IP address automatically and Obtain DNS server
address automatically.
6. Click OK.
You need restart your computer now or at a later time.
Note - The procedural steps above apply to Windows 2000
only. For Windows 95/98/ME/NT/XP, refer to your Windows
Documentation.
Collecting ISP Information
You need query the relevant information from your ISP before
configuring your router, for example:
▪ Has your ISP assigned you a static or dynamic IP address? If
you have obtained one static IP address, what is it?
▪ Does your ISP use PPPoE? If so, what is your PPPoE user
name and password?
Page 7 of 77