User's Manual

BASIC FUNCTIONS: DHCP
FIGURE 3-18: DHCP Page
4. Click Enable next to DHCP Server.
5. Type a IP Pool Starting Address to designate the first IP address that
can be assigned to a PC in your network.
6. Type a IP Pool Ending Address to designate the last IP address that
can be assigned to a PC in your network.
7. When you have completed editing all the settings, click Apply, or
click Cancel to undo your changes.
To Disable DHCP on Your Router:
1. On the DHCP page, click Disabled next to DHCP Server.
2. Click Apply.
To View the Active IP Table:
1. If you want to find out the information about PCs that have been
assigned IP addresses by the DHCP server, click Display DHCP
Table.
DHCP Server IP Address, Client Host Name, IP Address and
MAC Address for each active client PC will be listed out in the
table, seen in FIGURE 3-19:
Page 36 of 77