User's Manual
Table Of Contents
- User’s Guide
- Wireless LAN AP-Router
- Model:
- PW8540IM
- IEEE 802.11b/g
- System Requirement
- Installation Instructions
- Configuring Windows for IP Networking
- Collecting ISP Information
- Setup
- Global Address
- Wireless
- Tools
- Status
- DHCP
- Log
- Statistics
- Printer
- Virtual Servers
- Filters
- IP/URL Block
- Special Apps
- DMZ Host
- MAC Clone
- Dynamic DNS
- Proxy DNS
- SNMP
- Static Routing
- FEDERAL COMMUNICATIONS COMMISSION (FCC) REQUIREMENTS, PART 15
- REGULATORY INFORMATION / DISCLAIMERS
BASIC FUNCTIONS: WIRELESS
FIGURE 3-7: Wireless – Radio Settings Page
2. Click Enable next to Wireless.
3. Optional. Review the firmware version number and date
information that you are currently using.
4. Enter the following basic radio parameters:
Parameter Description
Mode
Selects the Wireless Mode that your Company AP
Router supports from the drop-down list.
Available options are 802.11B, 802.11G, and MIXED
which supports both 802.11B and 802.11G.
ESSID
Type the unique identifier for the Extended Service
Set which is shared by client stations in an
infrastructure association, such as WLAN-test.
It is case-sensitive and cannot exceed 32
Page 20 of 77