User Manual

Wireless LAN Access Point(RFMD) User Manual
17
 Wireless Bridge: All Bridges should use the same channel in the same connection.
 Point-to-Point: You have to fill in the MAC address of the Bridge that you want
to connect.
 Point-to-Multipoint: In Point-to-Multipoint mode, you don’t have to set MAC
addresses.
 Wireless Repeater Mode: This mode is used in order to increase the coverage area
of an ESS. The Wireless Repeater starts acting as an AP after it has associated itself
with another AP (Parent AP). From that point on, STAs can get associated to it and
the user can configure the device with the utilities available. You have to fill AP
BSSID in Preferred BSSID field. The ESSID and Channel of AP Client should be the
same as AP.
5.5.3. Modify Authorized MAC Adresses
Select Setup Æ Wireless LANÆ Authorized Mac Address
Different from most other configurations on Setup menu, all settings could be valid in this
frame.
 Load file: You can build a text file, which contains a list of MAC Addresses.
i.e. 001122334455
998877665544