Voice Processing System Installation Manual Panaso nic Model No. KX-TVP200 Thank you for purchasing the Panasonic Voice Processing System, Model KX-TVP200. Please read this manual before installing, customising, or operating the Voice Processing System.
Thank you for purchasing the Panasonic KX-TVP200 Voice Processing System. We are confident that it will provide your customer or client with many years of dependable service. This Voice Processing System was especially tailored for the environment of your country.
Important Information SAFETY REQUIREMENTS • • • • • • • • • • • • • • • • • • Follow all product warnings, cautions, and instructions. Handle the unit carefully. Do not drop or otherwise expose the unit to physical shock. If the unit malfunctions, disconnect the unit from the telephone line and check the line by reconnecting the telephone. If the telephone operates properly, have the VPS repaired by a qualified service technician. Install the unit so that the power cord is not obstructed in any way.
The serial number of this product may be found on the label affixed to the bottom of the unit. You should note the serial number of this unit in the space provided and retain this book as a permanent record of your purchase to aid in identification in the event of theft. MODEL NO.: SERIAL NO.: For your future reference DATE OF PURCHASE NAME OF DEALER DEALER’S ADDRESS DEALER’S TEL. NO. WARNING THIS UNIT MAY ONLY BE INSTALLED AND SERVICED BY QUALIFIED SERVICE PERSONNEL.
Note Before you start setting or changing system parameters, we recommend that you turn off the Answer Mode with the OFLN command. While off, the power LED of the VPS will flash and the VPS will not answer any incoming call. After you finish programming, use the ONLN command to turn on the Answer Mode (normal operation). Please see 7.2.1 Off-line Set (OFLN) and 7.2.2 On-line Set (ONLN) for more details.
