Installation Guide

9
INSTALLING GAS LINE
NOTI CE: A qualified service person must connect heater to gas supply. Follow all local codes.
IMPORTANT:
See Connecting to Gas Supply in your log set owner’s manual for details on gas hookup.
You may run the gas line from either side of the firebox (see Figure 7). Decide which side you want to run the gas line
from.
Note: This is one option for installing shutoff valve. Check local codes for equipment shutoff valve location requirements.
OPTIONAL BLOWER
This model can accept the optional blower and model number is FIB100.
If you plan to install or use the optional blower, a 120V AC with proper grounding electrical connection must be provided
at time of installation.
NOTE: A qualified electrician must connect electrical wiring to duplex outlet for built-in installation Follow all local codes.
In absence of local codes follow The National Electroc Code ANSI/NFPA 70.
Figure 7
Equipment Shutoff
Valves (Install One)
Knock Out
Locations
(Knock Out
One Hole)
Gas Line Hole