Product specifications
2020
REMEDY
1. Ventilate room. Stop using odor
causing products while heater is
running.
2. Locate and correct all leaks (see
Checking Gas Connections,
page 13).
3. Rell supply tank ( Propane / LP
models )..
1. Open window and/or door for
ventilation.
2. Contact local gas supplier.
3. Clean ODS/pilot (see
Care and
Maintenance, page 16).
1. Locate and correct all leaks (see
“Checking Gas Connections”,
page 13).
2.
Contact customer service.
1. Take apart gas tubing and re
-
move foreign matter.
2. Locate and correct all leaks (see
“Checking Gas Connections”,
page 13).
1. Refer to Air for “Combustion and
Ventilation” requirements page
6.
POSSIBLE CAUSE
1. Heater is burning vapors from
paint, hair spray, glues, etc. (See
IMPORTANT statement page 17).
2. Gas leak. See Warning Statement
at the top of page 17.
3. Low fuel supply.
1. Not enough fresh air is available.
2. Low line pressure.
3. ODS/pilot is partially clogged.
1. Gas leak. See Warning Statement
at top of page 17.
2. Control valve is defective.
1. Foreign matter between control
valve and burner.
2. Gas leak. (See Warning State
-
ment at top of page 17).
1. Not enough combustion/ventila-
tion air.
PROBLEM
Heater produces unwanted odors.
Heater shuts off in use (ODS
operates).
Gas odor exists even when control
knob is in OFF position.
Gas odor during combustion.
Moisture/condensation noticed on
windows.