User guide

INSTALLATION
BEFORE INSTALLATION
1.
Environmental and car temperature must be above 15º C at
installation, and installation surface must be dry and clean.
INSTALLATION
2.
ADHESION ADVICE
3.
It is essential for a good adhesion result that the surface is properly
cleaned and dry.
A high application pressure improves the binding power.
Ideal application temperature range is +20º C to +38º C but may
be extended down to +15º C. When applied binding strength is
maintained between -30º C and +70º C.
Do not use sealer on rubber gasket or other places.
PROCOM A/S reserve the right to amend specifications
without prior notice.
15/12/11