Instructions / Assembly
4
HARDWARE CONTENTS
Part
Description Quantity
Picture
(Shown to size)
Part
Description Quantity
Picture
(Shown to size)
BB
Cam Dowel
16
AA
Cam Lock
16
Wall Anchor
2
ST4 Screw
1 -3/16 in.
8
ST5 Screw
2- 3/8 in.
2
ST4 Screw
5/8 in.
18
Connector
Bracket
3
BB
CC
DD
EE
FF
GG
HH
II
White Key
1
ST4 Screw
1 -9/16 in.
8
WARNINGSANDCAUTIONS
PREPARATION
Before beginning assembly of product, make sure all hardware contents parts are present. Compare parts with
package contents list and diagram on page 4. If any part is missing or damaged, do not attempt to assemble the
product. Contact customer service for replacement parts.
Estimated Assembly Time: 60 minutes
Tools Required for Assembly: Philips Screwdriver, Flathead Screwdriver, Drill, and Tape Measure.
JJ
M6 Screw
1 -3/8 in.
4
WARNING
y When tightening screws, do not over tighten, this may cause threads to strip. We recommend using a
hand-held screwdriver rather than a power screwdriver.
y Do not force screws into holes.
CAUTION
y For corner installations(optional); if baseboards are installed where the fireplace is intended to be
displayed, then the fireplace will not fit flush against the wall. For a proper flush fit, you may need to remove
part of the baseboard mold if necessary.