Instructions / Assembly
11
Fig 13
13. After assembling the mantel, lift upright and
push the insert from the front of the mantel as
shown in Fig 13.
Wall Anchor
×2
Hardware Used
CC
Fig 14
14. Drill two holes (5/16 in) in the corner where the
fireplace is to be displayed. Drill the first hole 44-1/2
in. from the ground up, and the second hole 1-9/16 in.
from the first hole as shown in Fig 14. Put the Wall
Anchor (CC) in the holes by pinching the anchor tabs
together as shown in Fig 14.