CORNER COMBO WOOD FIREPLACE MANTEL Model #FBD400TCC-M-HC/MO FBD400RTCC-M-HC/MO Questions about installation, Operation or troubleshooting? Before returning to your retailer, contact our customer service department at 1-877-886-5989, 8:00a.m.—4:30p.m., EST, Monday—Friday or e-mail customerservice@usaprocom.com.
PRODUCT SPECIFICATIONS 2
PACKAGE CONTENTS If a part is missing or damaged - return to place of purchase (exterior wood components are not replaceable).
HARDWARE CONTENTS Part Description AA Cam Dowel 16 BB Cam Lock 16 CC Wall Anchor DD Quantity ST4 Screw 1 -3/16 in. ST5 Screw EE 2- 3/8 in. Picture (Shown to size) Part FF GG BB 2 HH 8 II Description ST4 Screw 5/8 in. Connector Bracket White Key ST4 Screw JJ 2 1 -9/16 in. M6 Screw 1 -3/8 in. Quantity Picture (Shown to size) 18 3 1 8 4 WARNINGS AND CAUTIONS WARNING y When tightening screws, do not over tighten, this may cause threads to strip.
ASSEMBLY INSTRUCTIONS Fig 1 1. Fasten the Left Upper Panel (C) and the Left Lower Panel (E) with M6 Screw 1-3/8 in. (JJ) as shown in Fig 1. Do the same thing for the Right Upper Panel (D) and the Right Lower Panel (F). Hardware Used JJ M6 Screw ×4 1 -3/8 in. Fig 2 2. After assembling the mantel (C, D, E, F), insert Cam Locks (BB) into Panel (B), screw in Cam Dowels (AA) into the Left Upper Panel (C) and the Right Upper Panel (D).
Fig 3 3. Insert Cam Locks (BB) into the Left Lower Panel (E) and the Right Lower Panel (F), screw in Cam Dowels (AA) into Base (G). Attach Base (G) into assembled frame (B, C, D, E, F) by tightening the Cam Locks (BB) as shown in Fig 3. Hardware Used AA Cam Dowel ×6 BB Cam Lock ×6 Fig 4 4. Fasten the batten with ST4Screw 1-9/16 in. (II) to the Base (E) as shown in Fig 4. Skip to step 9 for Corner Mantel Installation. Hardware Used II 6 ST4 Screw 1 -9/16 in.
Fig 5 5. Insert Cam Locks (BB) into Panel (B), the Left Upper Panel (C) and the Right Upper Panel (D), screw in Cam Dowels (AA) into Top (A). Attach Top (A) into assembled frame (B, C, D, E, F) by tightening the Cam Locks (BB) as shown in Fig 5. Hardware Used AA Cam Dowel ×6 BB Cam Lock ×6 Fig 6 6. Fasten the batten with ST4 Screw 1-9/16 in. (II) to the Top (A) as shown in Fig 6. Hardware Used II 7 ST4 Screw 1 -9/16 in.
Fig 7 7. After assembling the mantel, lift upright and push the insert from the front of the mantel as shown in Fig 7. Fig 8 8. Position the fireplace to the desired place as shown in Fig 8.
FOR CORNER APPLICATION Fig 9 9. Turn the fireplace Top (A) Panel over. Using the Connector Brackets (GG) that supplied, connect the Fireplace Top (A) to the Top Triangle Panel (H) with ST4 Screw 5/8 in. (FF) as shown in Fig 9. Hardware Used FF GG ST4 Screw ×18 5/8 in. Connector Bracket ×3 Fig 10 10. Insert Cam Locks (BB) into Panel (B), the Left Upper Panel (C) and the Right Upper Panel (D), screw in Cam Dowels (AA) into Top (A).
Fig 11 11. Fasten the batten with ST4 Screw 1-9/16 in. (II) to the Top (A) as shown in Fig 11. Hardware Used AA II ST4 Screw ×4 1 -9/16 in. BB Fig 12 12. Attach the left and right Backboard (I) trim pieces to the back of the fireplace with ST4 Screw 1-3/16 in. (DD) as shown in Fig 12. Hardware Used DD ST4 Screw 1 -3/16 in.
Fig 13 13. After assembling the mantel, lift upright and push the insert from the front of the mantel as shown in Fig 13. Fig 14 14. Drill two holes (5/16 in) in the corner where the fireplace is to be displayed. Drill the first hole 44-1/2 in. from the ground up, and the second hole 1-9/16 in. from the first hole as shown in Fig 14. Put the Wall Anchor (CC) in the holes by pinching the anchor tabs together as shown in Fig 14.
Fig 15 15. Attach the triangular wood block to the holes drilled in step 8 with ST5 Screw 2-3/8 in. (EE) as shown in Fig 15. This block is used to support the Set Square Support (J). For thin walls, insert white key (HH) into wall anchor and push to “pop” open anchor wings. Hardware Used EE HH ST5 Screw ×2 2 3/8 in. ×1 White Key Fig 16 16. Push fireplace into corner so that the Top Triangle Panel (H) is resting on top of the Set Square Support (J) as shown in Fig 16.
REPLACEMENT PARTS LIST Part Description Part # Quantity Hardware Package HP007 1 AA Cam Dowel PCAM-023 16 BB Cam Lock PCAM-023 16 CC Wall Anchor ML066-01 2 DD ST4 Screw 1-3/16 in. GB/T 951 4×30 8 EE ST5 Screw 2-3/8 in. GB/T 950 5×60 2 FF ST4 Screw 5/8 in. GB/T 951 4×16 18 GG Connector Bracket SJ002 3 HH White Key ML067-01 1 II ST4 Screw 1-9/16 in. GB/T 951 4×40 8 JJ M6 Screw 1-3/8 in.
WARRANTY INFORMATION Keep This Warranty IMPORTANT: We urge you to fill your warranty registration card within TEN(10) days of date of installation, complete with the entire serial number which can be found on the rating plate. Retain this portion of the card for your record. Always specify model and serial numbers when communicating with customer service. We reserve the right to amend these specifications at any time without notice. The only warranty applicable is our standard written warranty.
