User guide

DPF 6/6-HX-150
6-cavity Mobile or Base Station Duplexer for the 45 - 68
MHz Band
DESCRIPTION
The DPF 6/6-HX-150 is a six-cavity high-power mobile or base station
duplexer for the 45 - 68 MHz band.
This type of filter uses six large 40 x 40 mm cavities, all equipped with
3.5 mm silver-plated helical resonators, 19 mm diameter.
The use of large cavities and resonators means higher Q, resulting in
smaller duplex spacing with lower loss.
The larger dimensions extend power rating to 100 W continuous.
The DPF 6/6-HX-150 is designed for single-channel equipment, but can,
with slightly reduced data, be broadband-adjusted to allow multichannel
equipment to be used.
The cavities are made of extruded aluminium, the chassis of passivated
steel. All coaxial cables are of the semi-rigid type, and teflon has been
used in all connectors and cables.
The filter is black vinyl coated to prevent corrosion.
Please specify the frequencies for TX and RX when ordering, as all filters
are made individually.
ORDERING DESIGNATIONS
TYPE PRODUCT NO.
DPF 6/6-HX-150 200000447
SPECIFICATIONS
ELECTRICAL
MODEL DPF 6/6-HX-150
TX/RX FREQUENCY 45 - 68 MHz
MAX. INPUT POWER 100 W @ 1 dB insertion loss
MIN. DUPLEX SPACING 700 kHz
TYPICAL INSERTION LOSS @ 700 kHz spacing: 1.5 dB
@ 1.0 MHz spacing: 1.2 dB
@ 1.5 MHz spacing: 1.0 dB
TX NOISE SUPPRESSION ON RX-FREQUENCY
AND RX ISOLATION ON TX-FREQUENCY
@ 700 kHz spacing: 85 dB
@ 1.0 MHz spacing: 90 dB
@ 1.5 MHz spacing: 95 dB
IMPEDANCE Nom. 50 Ω
SWR ≤ 1.5
MECHANICAL
TEMP. RANGE –30° C → +60° C
FREQ. STABILITY Approx. 8 ppm/° C
CONNECTORS N-female
DIMENSIONS (L x W x H) 270 x 250 x 50 mm
WEIGHT Approx 2.5 kg

Summary of content (2 pages)