Use And Care Manual

www.usaprocom.com
7200016-01D
INSTALLING BLOWER ASSEMBLY
1. Remove blower access panel (see Fig-
ure 10).
Figure 10 - Removing Blower Access
Panel
Figure 11 - Attaching Blower Assembly to
Blower Access Panel
PC32VFC and PC36VFC Series Only
2. Mount blower onto blower access panel,
(see Figure 11).
3. Carefully insert blower and wiring through
access hole. Reinstall blower access
panel with screws removed in step 1.
Figure 12 - Installing Power Cord
Figure 13 - Attaching Grounding Wire
1. Insert power cord wires through hole in
side of rebox.
2. Attach the power cord to the replace
with three M4.2X8 screws (AA), (see
Figure 12).
AA
3. Install grounding terminal to the back wall
of rebox with 1) M4.2X8 screw (AA). The
hole for installing the screw is marked
with the grounding symbol as shown in
Figure 13.
AA
Power Cord
CONNECTING POWER SUPPLY