Use And Care Manual

ManualsBrandsProCom Heating ManualsFireplace Log Sets & AccessoriesBlower for ProCom and Duluth Forge Gas Fireplaces - Model# FIB100

1

2

3

4

5

6

7

8

9

www.usaprocom.com

200016-01D

6

4. Attach blower with M4.0X8 screws (CC),

after manually installing it into slots, (see

Figure 9).

Figure 8 - Positioning Blower Assembly

to Shell Board

Figure 9 - Installing Blower Assembly

3. Set blower plane and attach to two brack-

ets of shell board. Make sure blower is

installed into the slots (see Figure 8).

Blower

Assembly

Install

Blower

into Slots

Screws

Blower Access Panel

Figure 7 - Inserting Blower into Fireplace

CRHFD28TCM-6-AU, CRHFD32RT-M-MO,

FBD28 and FBD32 Series Only

2. Insert blower into the bottom space of

burner pan. Pay attention not to touch

wires inside (see Figure 7).

Figure 6 - Removing Blower Access Panel

INSTALLING BLOWER ASSEMBLY

1. CRHFD32RT-M-MO and FBD32 Series

Only Remove 2 screws securing panel as

shown in Figure 6. Remove panel to gain

access to blower compartment.

CRHFD28TCM-6-AU, CRHFD32RT-M-MO, FBD28 and FBD32 Series Only