Manualshelf

Full Product Manual

ManualsBrandsProCom Heating ManualsForced Air Furnaces175,000 BTU Portable Kerosene Diesel Forced Air Construction Heater
12345678910
www.usaprocom.com
160108-01C4
WHEEL ASSEMBLY
Models 160, 175 and 220
1. Slide Axle (A) through holes in wheel support frame.
2. Slide Wheel Spacer (B), then wheel (D) (concave side facing outward) onto axle.
3. Attach Acorn Nut (C) nger tight to end of axle.
4. Repeat steps 2 and 3 for opposite side, then tighten nuts with adjustable wrench.
Axle (A)
Acorn Nut (C)
Wheel (D)
Spacer (B)
Figure 2 - Wheel Assembly, 160, 175 and 220 Models
HANDLE ASSEMBLY
Models 160, 175 and 220
1. Slide rear handle (E) onto Wheel Support Frame. Insert Screws (G) from rear and attach
lock nuts (F).
2. Place Front Handle (I) under ange of fuel tank and insert 4 screws (J) from top of ange
through holes in ange into holes in handle. Attach Lock Nuts (H) and tighten.
Rear Handle (E)
Screw, 10-24 x 1.5 (G)
Lock Nut 10-24 (F)
Screw 1/4-20 x 1.75" (J)
Front Handle (I)
Figure 3 - Handle Assembly, 160, 175 and 220 Models
ASSEMBLY