User guide

36
Maintenance
Service Schedule
Engine Daily Check engine oil level. *** Fill to proper level (Do not overfill)
Vacuum Pump Daily Spray water displacing lubricant in lubrication cup at front of
console for 5 sec.
Solution Pump Daily Check oil level.** Fill to proper level (Do not overfill)
Chemical Inlet Tube Strainer Daily Check strainer for blockage, remove any debris
Vacuum Inlet Filter (In Waste Tank) Daily Clean filter, inspect, replace if damaged
Vacuum Hoses Daily Wash out with clean water
Automatic Waste Pump Daily Inspect and remove any debris or sediment
Vacuum Pump Weekly* Check oil level. Fill to proper level
Water Box Float Valve Weekly Check for proper seating and shut-off
Solution Pump Inlet Strainer Weekly* Check for debris and clean
Battery Weekly* Check for proper fluid level. Fill with distilled water only
Solution Outlet Screen Weekly* Inspect and remove any debris or blockage
High Pressure Hoses 25 hrs Inspect for damage or impending damage
Pressure Regulator 50 hrs Lubricate o-rings
Pressure Regulator 50 hrs Lubricate plug behind spring
Engine 50 hrs Change engine oil***
Engine 100 hrs Change oil filter***
Battery 100 hrs* Clean battery terminals
Automatic Waste Pumpout 100 hrs Clean inlet and outlet ports
Belts/pulleys 100 hrs Check belt wear and tension. Check pulley alignment.
Water Box Float Valve Seal 200 hrs. Inspect and replace seal as needed
Engine 200 hrs Service air cleaner elements*
Fuel Pump 200 hrs Check hose connections
Fuel Hose, Fuel Fittings 200 hrs Check connections and hose wear
Engine 200 hrs Check spark plugs for carbon deposits and proper gap
Chemical Valves 200 hrs Inspect and/or adjust packing nuts
Temperature Control Valve 200 hrs Inspect and/or adjust packing nuts
86317260 BLAZER GT