Installation manual
CM-02-001
TYTANu DI Water Heater
O.I. 6/27/03 Installation, Operation and Maintenance Manual
ECO page 12
Section 4: Temperature Controller:
Figure 4: Temperature Controller and Control Panel.
The TYTANu Heating System incorporates a self-tuning, PID microprocessor based, digital temperature controller with a set
high temperature alarm. The PID feature enhances the controller's ability to reach and maintain a constant process temperature.
The self-tuning feature enables the controller to measure the process characteristics and indicate desired values, which can be
displayed on LED displays.
This section provides a description of, and instructions for the Omron E5CK Controller. For a complete user guide, see the
Omron website, www.omron.com.
4.1 Temperature Controller E5CK:
1. The E5CK controller has two LED displays. The top LED displays the process value, modes and parameter symbols. The
bottom LED displays Set Points, parameter setting and the manipulated variable, heat.
2. The A/M key switches the controller between auto and manual operation. The Display Key when pressed for one second or
greater allows selection of the mode, and when pressed for less than one second the parameters are switched. The up and
down arrow keys advance decreases the setting or values in the bottom LED display.