User Guide

QUICK START GUIDE
PSC6194 Controller
PROCESS SOLUTIONS CORP.
(281)-491-3833
SALES@PSCTEXAS.COM 9
Process Screen
Set Point Warning
Edit Set Points
To edit the set point of the instruments,
press the boxed number, as shown by the
X
on the image, for the numerical pad to
appear.
Set the value and press ENTER.
No Border Valid Set Point
Yellow Border the Set Point is set above
the Instrument Range.
Red Border the Set Point is locked due to
the Totalizer. Please see Totalizer settings
for details.
ENTER Save value and return to previous
screen.
ESC Return to previous screen without
saving.
The value must be within the Instrument’s
range, or the Status light will start blinking
with an error.
Instrument Range Screen
Numerical Keypad
Instrument Range
The Instrument ranges must be set to the
FULL flow range of the Bronkhorst
instrument, shown on instrument label.
To edit range, press on the corresponding
SPAN value, as shown by the X on the
image, for the Numeric Keyboard.
ENTER Save value and return to previous
screen.
ESC Return to previous screen without
saving.
HOME Return to Main Screen