Operating instructions

9 External Dimensions

Dimensions are in millimeter (inch)

16C

10 Mountin

Mounting Method

Step 1: Insert the controller through the panel cutout.

Step 2: Insert the mounting bracket into the mounting groove at

the top and bottom of the controller

Step 3: Push the mounting bracket forward until the bracket stops

at panel wall.

Step 4: Insert and tighten screws on bracket to secure the

controller in place. (The screw torque should be 0.8kgf-cm to

1.5kgf-cm)

16C/8C/4C Mounting Method:

Mounting Bracket Installation