Operating instructions

325 40 022 Cable with BNC-plug, 10 m (33 ft)

710 10 031 Ultrasound couplant, 250 ml

325 40 048 Shear wave couplant, 100 g

327 01 033 Battery complete

327 01 053 Quick charger

710 10 028 Calibration rod 25 μs for Pundit PL-200

710 10 029 Calibration rod 100 μs for Pundit PL-200

327 01 070 Snap Ferrite for BNC Adapter cable*

327 01 051 Pundit Pulse Echo Cable

327 00 027 Pundit Pulse Echo Contact Tester complete

* In the case that receiving equipment within a radius of 10m suffers from interfer-

ence, it is possible to order a ferrite to ﬁt onto the BNC adapter cable. This serves

to further reduce the electromagnetic radiation produced by the instrument.

6. Maintenance and Support

6.1 Maintenance

To guarantee consistent, reliable and accurate measurements, the instru-

ment should be calibrated on a yearly basis. The customer may however,

determine the service interval based on his or her own experience and

usage.

6.2 Support Concept

Proceq is committed to providing a complete support service for

this instrument by means of our global service and support fa-

cilities. It is recommended that the user register the product on

www.proceq.com to obtain the latest on available updates.

6.3 Warranty Information

Each instrument is backed by the standard Proceq warranty and extend-

ed warranty options.

• Electronic portion of the instrument: 24 months

• Mechanical portion of the instrument: 6 months

6.4 Disposal

Disposal of electric appliances together with household waste is not

permissible. In observance of European Directives 2002/96/EC,

2006/66/EC and 2012/19/EC on waste, electrical and electronic equip-

ment and its implementation, in accordance with national law, electric

tools and batteries that have reached the end of their life must be col-

lected separately and returned to an environmentally compatible recy-

cling facility.

7. PL-Link Software

7.1 Starting PL-Link

Locate the ﬁle “PL-Link Setup.exe” on your computer or on

the CD and click on it. Follow the instructions on the screen.

Make sure that the “Launch USB Driver install”

tick is selected.

The USB driver installs a virtual com port which is

needed to communicate with the Pundit Touch-

screen Unit.