Specifications

45
Specifications
The correlation between published specifications and performance is unreli-
able. A list of numbers reveals virtually nothing. All technical measurements
must be subject to qualitative as well as quantitative interpretation.
Measurements of the PRE yield excellent results by any standards. However,
only those specifications that apply to its actual operation are included here.
■
Power consumption: less than 15 W
■ Mains voltage: determined by the needs of country for which
the unit was manufactured; cannot be reset by dealer or user
■ Overall dimensions: See “Dimensions”
■ Shipping weight: 25 lbs. (12.4 kg)
■ Audio Inputs: 2 sets stereo balanced
4 sets stereo single-ended
■ Audio Outputs: 1 set balanced stereo main path L&R outputs
1 set single-ended main path L&R outputs
2 sets record outputs (tape1, tape2/ssp)
■ Other Input:1
1
⁄8" mini-jack for external IR repeater
■ Gain: 14 dB (nominal)
■ Gain range: -60 dB to +14 dB
■ Gain resolution: 0.5 dB steps above 18 in display,
gradually increasing step size at lower levels
■ Input overload: 6 V rms (0 dB output)
■ Input impedance: 100kΩ (single-ended)
■ Output impedance: less than 20Ω
■ Maximum output (main outputs): 10 V rms, balanced
■ Signal to Noise ratio (main outputs): better than -80 dB (0 dB output)
For more information, see your Proceed dealer, or contact:
Madrigal Audio Laboratories, Inc.
P.O. Box 781
2081 South Main Street (Route 17)
Middletown, Connecticut 06457 USA
Telephone [phone]
FAX [phone]
If purchased in the United States or Canada, the warranty on this Proceed product
is owner-transferable. If your product requires service, you must obtain a Return
Authorization before shipping it to Madrigal. Madrigal reserves the right to repack
any product which arrives improperly packed for shipment and to charge the
owner for the required packing material.
For warranty information and conditions on products purchased in other countries,
contact your local dealer or distributor.