Specifications

Remote Control

Advanced Features

After you set up the remote control to operate your equipment, you can also

program advanced features on the remote control. The advanced features are

designed to enhance the use of the remote control with your home entertain-

ment system.

punch-throughs

volume control

“punch-through”

The PRE’s remote may be programmed to operate the volume + – controls

and mute button from either the TV or PRE to operate in conjunction with

any of the eight devices controlled by the remote. For example, since the PRE

will likely be used as the sound system for TV viewing, you may wish to

have the PRE’s volume activated when the remote is set to run the TV. Either

the AUDIO or TV volume control may be associated with any of the remote’s

devices.

NOTE: When this feature is active, the AUDIO or TV volume and mute will

override any existing volume controls in that mode.

To program the remote for Volume Punch-Through, follow these steps:

1 Select the mode that you wish to program for Volume Con-

trol “Punch-Through.”

2 Press the corresponding Device button (e.g., tv, sat, etc.) and

the mute button simultaneously. SET will appear in the LCD.

3 Press the adjust + button. PUNCH will appear in the LCD.

4 Press either the pre/audio or tv Device selector, depending

on which system’s volume control you wish to have attached

for the punch-through mode. AUDIO or TV will flash in the

LCD.

Example: To have the PRE’s volume control be activated even though the

remote is set to control TV, first press the tv Device control selector, and the

mute button at the same time. Next press the adjust + button, followed by the

pre/audio Device control selector.

To return to the original setting, follow these steps:

1 Select the mode that you want to turn off the Volume Control

“Punch-Through” and press the corresponding Device button

(e.g., tv, sat, etc.) and the mute button simultaneously. SET

will appear in the LCD.

2 Press the adjust + button. PUNCH will appear in the LCD.

3 Press the same Device button again. The Device mode will

flash in the LCD.

The AUDIO or TV Volume Control “Punch-Through” is now turned off. The

VOLUME and MUTE of the original device will operate on the remote control.