Specifications

erasing learned functions

To erase learned functions, please refer to the following procedures:

Erasing Individual Buttons:

1 Press the Device button for the mode where the learned func-

tion has been stored.

2 Press-and-hold the Device and the play buttons simultaneously,

for about three seconds, until the LCD shows LEARN.

3 Press-and-release the button to be erased. The LCD will show

READY.

4 Press the light button. The LCD will flash ERASE, CLEAR, the

Device Mode and then return to LEARN.

Repeat steps 3 and 4 for any other buttons to be erased.

5 To return to the normal operating mode, press the Device

and play buttons simultaneously.

The learned functions on the selected buttons have now been erased.

The pre-programmed functions for these buttons will now operate on the

remote control.

Erasing All Buttons in One Device Mode:

1 Press the Device button for the mode to be erased.

2 Press-and hold the Device and play buttons simultaneously,

for about three seconds, until the LCD shows LEARN.

3 Press-and-hold the Device and light buttons simultaneously

for approximately five seconds and then release the buttons.

The LCD will flash ERASE and then alternately CLEAR and the

Device Mode.

NOTE: When the LCD on the remote returns to the

Device Mode

, all the learned

functions in the selected Device mode have been erased. All the buttons in that

Device mode will now operate with the preprogrammed functions in that mode.

Erasing All Buttons in All Device Modes:

1 Press-and-hold the tv Device Button and the light button si-

multaneously, for approximately ten seconds. The LCD will

flash ERASE ten times, flash CLEAR and then return to the TV

mode.

When the LCD on the remote returns to tv, all the learned functions in all

eight Device modes have been erased. All the buttons in all Device modes

will now operate with the preprogrammed functions in their respective modes.

operation After you have programmed the remote control for your equipment, use the

following procedures to operate your home entertainment system:

1 Press the Device button that you wish to operate: e.g., to oper-

ate a TV press the tv Device button; to operate a VCR, press the

vcr Device button, etc.

2 Aim the remote control at the device and press the power/

standby

button to turn on the device.

3 Press the buttons that send out the commands you desire.