Specifications

10 AC MAINS FUSE AND AC POWER RECEPTACLE

An ac mains fuse is provided which disconnects the PRE from the wall

outlet’s AC power under fault conditions. If this fuse should “blow” for

any reason, replace it only with the same value fuse (0.5A/250V slo-blo

5x20mm).

Caution! Replacing the ac mains fuse with a anything other than the

recommended value fuse will places the PRE at substantial

risk of damage!

Plug the supplied three-prong power cord into the ac power input re-

ceptacle provided before plugging the power cord into the wall. If a

longer AC power cord is required for your application, be sure to use a

three-conductor power cord which conforms to IEC standards.

Caution! The Proceed PRE has been safety-tested and is designed

for operation with a three-conductor power cord. Do not

defeat the “third pin” or earth ground of the AC power cord.