Specifications

2
INDEX
- Introduction 3
- The Range of H.P.A. products 4
- Technical specifications 5
- Instructions for installation 6
- Customising the operating functions 8
- Checking the setting of the operating functions 8
- Description of the operating functions 9
- The override code 12
- Remote controls 15
- Emergency keys 15
- Checking the remote controls and emergency keys 15
- The garage function 16
- The control unit’s power supply 16
- Memory of triggered alarms 16
- Final Check 16
- Instructions for use 17
Dear Installer,
Congratulations on your choice of a MetaSystem product! We would like to ask you to read the instructions
in this manual carefully as you will find it contains useful information to get acquainted with the many possibilities that the
H.P.A (High Performance Alarm) range of products is able to offer.
After you have installed the product according to the “installation instructions” supplied with the product, and which
you will also find below, the alarm control unit must be programmed in order to customise the product based on the vehicle
that it is installed on.
When you have finished the job, it is important to remember to give the user’s handbook to the owner of the vehicle
and to show him the various features of his car alarm system. Please remember to fill out the “certificate of installation” in
the user’s handbook (European Directive) and to give the owner the red card that he will need should he decide to order any
extra remote controls, as well as the OVERRIDE CARD where you should have already written the owner’s emergency code,
customised according to his choice.
Best Regards !