User guide

821116: AMP2-16V Series User Guide

Chapter 5 Menu List

Automation Menu

Figure 5–9 Automation Menu

This menu shows Ten Condition/Response lines that you can

individually enable or disable. Each line automatically enables when

either a

Condition or a Response is selected. Lines that do not have

both a Condition and a Response are automatically deleted when

you exit the menu. The priority of each Condition/Response is

determined by its position in the list: The higher the position, the higher

the priority.

In operation, if more than one condition is met, the one higher in the list

will rule. The Response events are edge triggered, that is, they will only

take effect when a change occurs. You can therefore override any

automated change at any time. And your changes stay in effect until the

current condition is removed and then met again, or until another

condition is met. As long as a high priority condition is met, lower

priority conditions are ignored.

Responses can only take effect when the Main Screen is displayed. If a

condition is met when control is in the Dolby Zoom screen, the

Response will be delayed until the Main Screen is once again displayed.

This will prevent a preset change from interrupting your analysis in the

Dolby Zoom screen. Likewise, if a condition is met when control is in

any of the menu screens, the Response will be delayed until all menus

are exited to avoid any unexpected changes.

Automation Menu

Help Cancel

Condition

Slot 1 3G SDI I/O = HD

Slot 1 3G SDI I/O = SD

Response

P3 HD Preset

P2 SD Preset

Select

Row

Select

Condition

Slot 1 3G SDI I/O (Pr 1) = Dolby

P4 5.1 Chan

Save / Exit

Auto

Mode On

Select

Response