User guide

821116: AMP2-16V Series User Guide
© 2011 Wohler Technologies, Inc. All rights reserved.
87
Chapter 5 Menu List
Automation Menu
• Analog Input/Output: Pressing a knob with this description
displays the Analog Output Configuration Menu. In this menu
signals can be mixed to output through the analog outputs.
• Analog I/O and TOSLINK Input: Pressing a knob with this
description displays the
Analog Output Configuration Menu. In
this menu signals can be mixed to output through the analog
outputs.
• AES Output: Pressing a knob with this description displays the
AES Output Configuration Menu. In this menu, signals can be
mixed for output through the AES outputs.
• AES Input: Pressing a knob with this description displays the AES
Input Configuration Menu
. In this menu, you can set or remove
AES terminations.
• Dolby: Pressing this knob displays the Dolby Decoder
Configuration Menu as shown on page 93 where you can configure
the Dolby D/E Card (if installed) and display live Dolby metadata.
In this screen, the source of the Dolby metadata can be set, along
with other parameters. If the AMP2-16V is not equipped with the
Dolby D/E card, then this label will not display.
Automation Menu
This menu allows you to set the system so that it automatically
performs certain functions based on conditions you set.
Configuration Selection
Menu
Main Screen
Menu
Configure
Options
Option
Configuration Menu
Automation
Menu
Automation Menu