User guide

821116: AMP2-16V Series User Guide

Chapter 5 Menu List

Audio Processor Card Menu

• If a Test Channel is out of phase with its Reference Channel,

then the

Test Channel will be shown with a filled triangle, while

the Reference Channel will be shown with an empty triangle.

Audio Processor Card Menu

The Audio Processor Card Menu allows you to select each optional

module independently to configure inputs, mixing, and outputs.

Figure 5–8 Audio Processor Card Menu

Slots 1 through 5: Each occupied slot displays the name of the card in

that slot. Press the knob of the corresponding card to display the

Configuration Menu for the card in that slot. If a slot is empty, the

label will be gray and disabled, no card name will appear, and the knob

will have no function. Rotating the knob does nothing; select the card

by pressing the knob. Refer to the AES/Analog Output Configuration

Menu on page 81 for configuration option examples.

• 3G SDI I/O: Pressing a knob with this description displays the

SDI Output Configuration Menu

. You can delay the input

signals in this menu.

Configuration Selection

Main Screen

Audio

Processors

Audio Processor Card Menu

ExitHelp Exit

3G SDI I/O Card

Configuration

Slot 1

No Card Installed

Analog I/O Card

Configuration

AES Output Card

Configuration

AES Input Card

Configuration

Slot 5

Slot 3

Slot 4

Dolby Card

Configuration

Dolby

Slot 2