User guide

821116: AMP2-16V Series User Guide

Chapter 5 Menu List

AES/Analog Output Configuration Menu

• AES 75-Ohm Term: Rotate the knob to highlight each individual

channel and then press the knob to toggle termination.

• Terminate All: Press the knob to toggle the termination of all the

channels simultaneously on or off.

AES/Analog Output Configuration

These menus allow you to:

• Adjust the level of each channel, and

• Mix or direct sources to outputs.

The menu can take one of two forms depending on the channel pair

you want to send to the output port:

• The same channel selection that is audible on the speakers (Follow

Monitor mode), or

• Any other selection (Free Mix mode).

Follow Monitor/Free Mix: Pressing this knob toggles between the

menu display shown in Figure 5–5 below, and the display shown in

Figure 5–6 on page 83.

Note:

The AES and Analog Output Configuration Menus and

controls are almost identical so we are only showing the

Analog Output Configuration Menu.

Configuration Selection

Main Screen

Audio

Processors

Audio Processor Card Menu

AES Output

Configuration Menu

AES Output Card

Configuration