User guide

821116: AMP2-16V Series User Guide
© 2011 Wohler Technologies, Inc. All rights reserved.
56
Chapter 3 The “How Do I...” Chapter
Frequently Asked Questions
2. To terminate or unterminate one AES input pair, turn the AES
75-Ohm Term
control to select the desired AES input pair and
then press it. This, too, is an alternate-action button.
How Do I Lock Entry to the Menus?
In some installations, it may be advantageous to lock access to the
menu system. The AMP2-16V is equipped with the ability to set a
simple menu access lock.
Navigate to the
Select Menu Lock Screen Combination screen:
Figure 3–26 Select Menu Lock Combination
1. Instructions are located on the screen. Simply press the knobs to
form an unlocking combination. In Figure 3–26 above, the
combination is 1-3-7. Make sure you remember the combination
you set!
Configuration Selection
Menu
Main Screen
Menu
Configure
Options
Option
Configuration Menu
Hardware
Configuration Menu
Configure
Hardware
Menu Lock
Select Menu Lock
Combination
Select Menu Lock Combination
Save / ExitHelp Cancel
Key 5
Key 6
Key 3
Key 1
Key 2
Key 4
Key 7
Key 8
Select Menu Lock combination by pressing
the encoders to indicate the desired
combination.
To unlock the first menu, hold the center
navigation button and press the
combination.
Current Status: Lock Enabled