User guide

821116: AMP2-16V Series User Guide
© 2011 Wohler Technologies, Inc. All rights reserved.
50
Chapter 3 The “How Do I...” Chapter
Frequently Asked Questions
5. Turn the Channel Trim knob to adjust to mix level of that
channel.
6. Turn the Pan knob to pan the input channel between the selected
even and odd output channels.
How Do I Adjust Mixer Levels from the Main
Screen?
Any of the input channels can be mixed to any of the AES or analog
outputs. Although mix levels can be set in the output configuration
menus of each output card, hot keys can be used to allow you to adjust
mix levels from the Main Screen. The hot keys for mixer controls are
set in one of the Hot Key Configuration Menu. This can also be done
for the monitor mixer:
Figure 3–21 Hot Key Configuration Menu
Configuration Selection
Menu
Main Screen
Menu
Configure Main
Screen
Main Screen
Configuration Menu
Hot Key 1-8
Configuration Menu
or
Hot Key 9-16
Configuration Menu
Configure
Hot Keys
Hot Key 9 - 16 Configuration Menu
Save / ExitHelp Cancel
Off
1 2 3 4 5 6 7 8
Selectable
Dolby Zoom
1 3 5 7 9 11 13 15
2 4 6 8 10 12 14 16
AES Out (4) Trim
AES Mic Channe...29
Recall Preset
Press for Stat/Meta
Status/Metadata
Off
Dolby
Zoom
Key 7
Trim
Key 1
Rec 1
Key 5
Stat
Mdata
Downmix
Dnmix
Key 8
SDI Feed from Den...24
Status/Metadata/Preset
Data
Pre
Key 2
LtRt LoRo
Auto
Mode
Automation On-Off