User guide

821116: AMP2-16V Series User Guide
© 2011 Wohler Technologies, Inc. All rights reserved.
43
Chapter 3 The “How Do I...” Chapter
Frequently Asked Questions
Figure 3–14 Hot Key 9 - 16 Configuration Menu
2. Make sure you have a Main Data Screen showing. Refer to Main
Screen Arrangements on page 67 for Main Screen examples.
3. Now on the main Data Screen, the you can press the Status/
Metadata
control to display the Status Screen, which contains
the Dolby line position data:
Figure 3–15 Data Screen
4. If desired, you can change the arrangement of data on this screen,
or change the size, spacing, or text colors to best display the data
you need to see. Refer to IV. Select the Metadata to Display on the
Screen on page 10.
Hot Key 9 - 16 Configuration Menu
Save / ExitHelp Cancel
Off
1 2 3 4 5 6 7 8
Selectable
Dolby Zoom
1 3 5 7 9 11 13 15
2 4 6 8 10 12 14 16
AES Out (4) Trim
AES Mic Channe...29
Recall Preset
Press for Stat/Meta
Status/Metadata
Off
Dolby
Zoom
Key 7
Trim
Key 1
Rec 1
Key 5
Stat
Mdata
Downmix
Dnmix
Key 8
SDI Feed from Den...24
Status/Metadata/Preset
Data
Pre
Key 2
LtRt LoRo
Auto
Mode
Automation On-Off
Input Status
+0
-28 LKFS
Menu SwapHelp
Preset Name
Dolby Line Position Pair 5: N/P
Dolby Line Position Pair 6: N/P
1920x1080/29.97i
SDID Embedding Method: B
Dolby Headers Present: 8
Dolby Line Position Pair 1: 24
Dolby Line Position Pair 2: N/P
S2020 Line Number: 14
Dolby Line Position Pair 3: N/P
Dolby Line Position Pair 4: N/P
Dolby Line Position Pair 7: N/P
Dolby Line Position Pair 8: N/P
Dolby
5.1
AES 1
Down
Mix
AES 2
Meta
ANLG
Status
SDI
AES