User guide

821116: AMP2-16V Series User Guide
© 2011 Wohler Technologies, Inc. All rights reserved.
39
Chapter 3 The “How Do I...” Chapter
Frequently Asked Questions
Figure 3–10 Dolby Decoder Configuration Menu
1. Turn the Decoder Source control to the AES or SDI channel pair
that contains the Dolby bitstream to be decoded.
2. You should see the metadata from that Dolby bitstream. Adjust
the other controls if necessary so that you see the data you need.
3. Follow the instructions on the next page to select which meter
channels you would like to view the decoded channels on.
Now that you have connected a Dolby bitstream source to the Dolby
decoder, you need to connect the outputs of the Dolby decoder to the
metering channels you will be monitoring the audio on.
This step involves configuring the monitor mixer:
Dolby Decoder Configuraton Menu
Save / ExitHelp Cancel
Decoder Source
Pro-16 Mode
Channel
Dolby E
Program
Slot 1 (AES
In) Pair 1
Channel 1
Program 1
Decode
Aux Pair
DRC Mode
All formats
LtRt Downmix
Line Mode
Coding Mode
1/0 (C)
Bitstream Mode
Complete Main
Dialogue Level
- 27 dBFS
Frame Rate
29.97 fps
LFE Channel
Disabled
Surround Mode
Not Srnd Encoded
Mdata Scroll
CRC Error
Reporting
On
Configuration Selection
Menu
Main Screen
Menu
Configure
Monitor Mixer
Monitor Mixer
Configuration Menu