Manualshelf

User guide

ManualsBrandsPROCEED ManualsAmplifierAMP2
41424344454647484950
821116: AMP2-16V Series User Guide
© 2011 Wohler Technologies, Inc. All rights reserved.
37
Chapter 3 The “How Do I...” Chapter
Frequently Asked Questions
How Do I Monitor Dolby Bitstreams?
Only one bitstream may be decoded at any given time, but that
bitstream may produce up to 10 channels of audio. All 10 resultant
channels can be monitored at the same time if desired. You may change
the Cluster Select hot keys associated with those bitstreams into
Dolby Zoom hot keys. Then you will be able to press these Dolby
Zoom
hot keys to listen to the encoded audio and view the Dolby
metadata from that bitstream.
To set up a Dolby Zoom hot key, use the Configure Hot Key menu:
Figure 3–9 Hot Key Configuration Menu
1. Turn the control associated with the hot key you want Dolby
Zoom
to be on so that the long bar (not the control label) is
highlighted. Press the control until the turquoise
Dolby Zoom
function is found.
Note:
The AMP2-16V must contain the optional Dolby decoder
card in order to decode Dolby bitstreams.
Configuration Selection
Menu
Main Screen
Menu
Configure Main
Screen
Main Screen
Configuration Menu
Hot Key 1-8
Configuration Menu
or
Hot Key 9-16
Configuration Menu
Configure
Hot Keys