User guide

821116: AMP2-16V Series User Guide
© 2011 Wohler Technologies, Inc. All rights reserved.
34
Chapter 3 The “How Do I...” Chapter
Frequently Asked Questions
How Do I Synchronize Internal Speaker Audio with
an External Video Source?
Audio from all input sources can be delayed before it gets to the
internal speakers by up to 170 ms. This is adjustable in 1 ms increments.
Audio Delay is enabled and adjusted in the Monitor Mixer
Configuration Menu
. Before proceeding to this menu, adjust the
Main Screen controls so that you are viewing the video and hearing
the associated audio. Then proceed to the
Monitor Mixer
Configuration Menu
:
Figure 3–7 Monitor Mixer Configuration Menu
1. Press the
Audio Delay control to turn on the delay feature.
2. Turn the
Audio Delay control while listening to the audio and
watching the video. Adjust so that they appear to be synchronized.
3. The Audio Delay control will then show you how much delay it
needed to add.
4. If you need to set a specific delay, you can of course do that by
simply adjusting the
Audio Delay control to that amount.
Configuration Selection
Menu
Main Screen
Menu
Configure
Monitor Mixer
Monitor Mixer
Configuration Menu
Monitor Mixer Configuration Menu
Save / ExitHelp Cancel
Chan 1 Chan 2 Chan 3 Chan 4
Slot 2 SDI-3G In
Pair 4
Slot 1 AES In
Pair 1
+0 +0 +0+0
Channel
Trim
Source
Pair
Select
Phase
LED
On/Off
Delay to Speakers = 170 mS
Audio
Delay
Dolby 5.1
Speaker
Mute:
Off
L Front R Front Center LFE
Channel
Func
Mixer
Channel
Select
Set
Clusters